Station Speed Dial - KX-TDA, TDE, NCP, TAW848

To use Station Speed Dial on the above systems

Press Intercom, Dial STAR STAR STAR  or  Press AUTO DIAL, STAR

Dial speed dial code (any number from 00 to 09 on the dial pad)

To Store Station Speed Dial

Press INTERCOM, STAR, 30,

Dial speed dial code (any number from 00 to 09 on the dial pad)

Enter 9 and the number as you would normally dial

Press POUND

Hang Up

SAMPLE: To program 1858 555 1212 in Dial Speed Code 03 you would do the following, press INTERCOM, STAR,  30, 03, 918585551212, POUND, Hang Up.  To call this person, press INTERCOM STAR, STAR, STAR, 03 and the number would be called.  Remember, you have 10 positions to program, 00 to 09.  STAR means * POUND means #

If you have programmed your phone to preferred line access to an outside line when you pick up the handset, you must press intercom before dialing the station speed dial.  Single-line phones are always in intercom mode when the handset is picked up.

Station Speed Dial is a feature on KX-TD digital systems that allows you to have up to 10 speed dial numbers stored at your extension.  These numbers are not on buttons and require you to use a code to access each number.  The chart above shows how to enter 858-555-1212 and then dial the number.  When storing, remember to dial 9 or another line access code for an outside line and to press # after you have entered the number.  If you have a 7400 series display phone click here.