kxinfo.us

A simplified user guide for the Panasonic KX series of telephone and voice processing systems.

Home

Ringing Tone Selection for Lines

How do I program each line to have a distinctive ring?

This feature allows you assign a specific tone (frequency) to each line key on your phone.  Feature only available on digital phones, on digital systems.

YES, you need to do it for each line and your intercom button if you want them all to ring the same.

KX-TDA, TDE, NCP  Systems

KX-TD Systems

Press PROGRAM

Program  Press the CO Line key you wish to change

Press the same key again, enter the tone number (01 through 30)

 You will hear the tone associated with the tone type number.  For example, if you press 02, you will hear the tone associated with tone type 22.  Press each number (01-30) until you hear the tone you desire. 

Press STORE

 The tone is now stored for that line on that phone only.

Press PROGRAM 99 (or PAUSE 99 if you do not have a PROGRAM button

Press the CO Line key you wish to change

Press the same key again, enter the tone number (1 through 8)

 You will hear the tone associated with the tone type number.  For example, if you press 2, you will hear the tone associated with tone type 2.  Press each number (1-8) until you hear the tone you desire. 

Press STORE

 The tone is now stored for that line on that phone only.
On later KX-TD digital systems (software version -4 or higher) you can also adjust the Ringing Tone for your INTERCOM key.  Procedure is the same except press the INTERCOM key instead of a CO line key.